[. . . ] operating Manual (this manual) Safety Guide Quick Reference Guide This manual provides all information required to use the scanner. The Safety Guide explains safety precautions and other important information. The Quick Reference Guide explains the installation of the unit and software. For details about viewing the help files, see "To view the help" (page 26). [. . . ] Select Scan button or Place to Scan for the condition to automatically start up the application. Note • • • The application can be selected from Presto!The set application is enabled for both "place to scan" and "when a single touch scan button (1-3) is pressed". For details about the Scan Button Setting Tool, refer to the Scan Button Setting Tool help. Setting the scanning conditions Scanning conditions are set on the setting screen of each application. €¢ When "single touch scan button (1-3)" is selected: Press a button for more than 2 seconds to open the setting screen of each application. ) • When "place to scan" is selected: Open the setting screen of each application manually. €¢ For details about the setting screen of each application, refer to the manual or help for that application. Checking events Check the following if an application does not start up after being set. Select this scanner in [Devices and Printers], right-click the icon, and display the [Scan Properties] screen. €¢ When using Windows Vista, click the scanner icon, and then click the Properties button. Notes about double feed detection • This scanner is equipped with an ultrasonic sensor to detect double feeding. 32 Operating Manual Operation Scanning Documents Notice • Make sure to remove paper clips and staples from documents before scanning. €¢ • • • Before feeding, ensure that the document is not creased or folded. If the document is creased or folded, a paper jam or damage to the document may occur. When scanning important documents, confirm that the number of scanned images matches the number of pages in the document. €¢ Documents that have been stapled together or stacked together (as in a file folder) will need to be separated. To flatten the documents, hold firmly and pull them apart as shown in the illustration. Adjust the document guides (A) slightly larger than the actual size of the documents. €¢ The documents feed better when the leading edges are aligned slantwise as shown in the illustration. Place the documents on the feed tray with the side to be scanned facing down. €¢ Set the leading edge of documents as shown in the illustration (A). [. . . ] required Materials • Original scanner carton and packing materials • Shipping tape and scissors 1. Press and hold the power button for one second or more to turn off the scanner power. Unplug the power cord from the outlet, and remove the AC adaptor and USB cable from the scanner. €¢ If the mixed batch card guide is not attached to the scanner, attach it. [. . . ]